With Safety Inspections Lagging Behind, Who Will Protect The Lives of Miners?

2025-02-26

According to statistics: in China, up to 3 million miners rely on passenger aerial ropeway to travel between mines every day, but in actual operations, passenger aerial ropeway transportation accidents are still common, causing irreparable losses and pain.

As a key component of the passenger aerial ropeway, the reliability and safety of the wire rope are directly related to the life safety of miners. Once the wire rope has problems, such as breakage, wear, etc., it will directly affect the normal operation of the passenger aerial ropeway and may even cause safety accidents. Therefore, the safety and reliability of the passenger aerial ropeway wire rope are crucial.

Luoyang TST flaw detection technology co., ltd independently developed a real-time online intelligent flaw detection system for wire ropes, which has been fully applied in many industries.

The system has the ability to penetrate the intricate structure of wire ropes and accurately capture and quantify all kinds of potential safety hazards, including but not limited to details such as broken wires, wear and rust. Even the slightest changes cannot escape its highly senssor.

Once any abnormal situation is found, the system will automatically generate a comprehensive and detailed analysis report and issue a warning signal in real time. This process greatly shortens the detection cycle and significantly reduces the burden and dependence of manual inspections.

Before the introduction of the TST real-time online intelligent flaw detection system for wire ropes, most companies still used manual visual inspection:

Step 1: Clean the wire rope from oil and dirt. The cleaning process is extremely cumbersome and time-consuming. After repeated scrubbing for several hours, the naked eye can barely see the wire rope structure to ensure the accuracy of the inspection.

Step 2: Professional inspectors will inspect the wire rope in use with rags, gloves, flashlights, mirrors, etc., measure the rope diameter with calipers, and then judge the status based on experience.

Manual inspection is subject to subjective errors.

Manual visual inspection can only find defects on the outside of the wire rope, but it is powerless to detect internal defects. In addition, when there is oil on the surface of the wire rope, it is difficult to detect the existence of damage with the naked eye. Obviously, the traditional manual visual inspection method is time-consuming and laborious, and is affected by the experience and subjective will of the inspectors, and the credibility of the inspection results is very low.

Fortunately, with the rapid development of science and technology, TST Wire Rope Real-time Online Intelligent Flaw Detection System came into being, bringing unprecedented convenience and efficiency to the safety inspection of mine wire ropes.

Today: Intelligent wire rope monitoring systems replace manual inspection

24-hour x 365-day full life cycle safety monitoring, timely detection of wire rope safety hazards, reducing manual labor intensity and completely eliminate rope breaking accidents.
High-precision and high-reliability test results provide customers with scientific and objective decision-making basis, effectively improving work efficiency and safety.

Installation and operation cases:

"The wire rope was rusted at 38 meters, with a damage index of 4.8%. At 90 meters, there was 3.2% internal wire breakage. This online monitoring system is really powerful. It detects in real time, and we no longer need to waste time and effort on manual inspections in this extreme weather."

In order to significantly improve the efficiency of wire rope inspection in various industries, greatly reduce the physical labor burden of inspectors, TST wire rope real-time online intelligent flaw detection system came into being and became a powerful assistant for the transformation and upgrading of various industries.

With its "fast, accurate and precise" monitoring capabilities, TST system easily replaces manual inspections and eliminates all safety hazards of wire ropes.

What is more worth mentioning is that the use of the system will not interfere with the normal operating process at all. It can carry out continuous and uninterrupted monitoring without affecting daily operations, greatly improving the efficiency and accuracy of rope checking work.

prev: Wire Rope Achieves All-day Safety Supervision

next: Back to List